Optimizing the making of written batik on mori cloth automatically using programmed canting motion with temperature and feed-rate analysis
Akhmad Khoirur Rizal · Jurnal POLIMESIN · 2025
This study aims to optimize the technique of making batik writing on plain cloth using an automatic CNC machine with a regulator temperature and feed rate. Research methods were used. For test influence variation temperature wax (70 °C, 80 °C, and 90 °C) and feed rate against quality batik pattern and depth penetration wax. The use of temperature sensors on electric ramps allows precise temperaturecontrol at a time-adapt rate feeding to detect effects on thickness patterns and penetration wax. The result shows that improved temperature wax will increase its penetration in Mori, especially at a low feed rate, which produces a thick pattern. The rate of displacement or higher feed rate will speed up the process but tend to reduce penetration wax and thickness pattern. At a temperature of 90 °C and a feed rate of 450 mm/min. Quality is optimal for batik patterns and good wax. The balance between temperature wax and rate of displacement or feed rate is important to reach patterned batik results that are deep and consistent, which supports efficient batik production with still guard mark art.