PRECISE LANDING OF VTOL UAVS USING A TETHER
Jeremy Rathjen · 2022
Unmanned Aerial Vehicles (UAVs), also known as drones, are often considered the solution to complex robotics problems. The significant freedom to explore an environment is a major reason why UAVs are a popular choice for automated solutions. UAVs, however, have a very limited flight time due to the low capacity and weight ratio of current batteries. One way to extend the vehicles' flight time is to use a tether to provide power from external batteries, generators on the ground, or another vehicle. Attaching a tether to a vehicle may constrain its navigation but it may also create some opportunities for improvement of some tasks, such as landing. A tethered UAV can still explore an environment, but with some additional limitations: the tether can become wrapped around or bent by an obstacle, stopping the drone from traveling further and requiring backtracking to undo; the tether can fall loose and get caught while dragging on the ground; or the base of the tether could be mobile and the UAV needs to have a way to return to it. Most issues, like those listed above, could be solved with a vision system and various kinds of markers, but this approach could not work in situations of low light, where cameras are no longer effective. In this project, a state machine was developed to land a tethered, vertical take-off and landing (VTOL) UAV using only angles taken from both ends of the tether, the tension in the tether, and the height of the UAV. The main scenarios focused on in this project were normal operation, obstacle interference, loose tether, and a moving base. Normal operation is essentially tether guidance using the tether as a direction back to the base. The obstacle case has to determine the best action for untangling the tether. The loose tether case has to handle the loss of information given by the angle sensors, as the tether direction is no longer available. This case is performed as a last-ditched effort to find the landing pad with only a moderate chance for success. Lastly, the moving base case uses the change in the angles over time to determine the speed needed to reach the base. The software was not the only focus of this project. Two hardware components of this project were a landing platform and a matching landing gear to support the landing process. These two components were designed to