Low Capture Power At-Speed Test with Local Hot Spot Analysis to Reduce Over-Test
Ankush Srivastava, Jais Abraham · 2022
Power induced over-testing typically occurs when fully functional chips failed during testing because of excessive IR-drop and/or power supply noise caused by scan-based at-speed test patterns. Over the years, this problem has been tackled by either improving automatic test pattern generation (ATPG) algorithms or low power design-for-test (DFT) techniques that typically requires hardware changes. The paper presents a methodology to address the excessive voltage droop during at-speed transition delay fault testing. A partition-based low capture power adaptive test procedure is proposed in three steps. First, identification of the physical partitions of local hot spots, Second, extract partition-based low capture power constraints. Third, the extracted constraints are given to the ATPG engine for generating at-speed patterns that satisfy the local hot spots power constraints, while minimizing the pattern count increase. Post-silicon Vmin measurements on various designs illustrates the effectiveness of the proposed solution.