Improved Acquisition System for Sensored Vector Control Through Frequency-Domain Multiplexing, Synchronous Sampling, and Differential Evolution
Raymundo Cordero Garcia, Faete Jacques Teixeira Filho, João Onofre Pereira Pinto, Walter Issamu Suemitsu, Brayan Sobral da Fonseca, Angelo Darcy Molin Brun · IEEE Sensors Journal · 2020
Frequency domain multiplexing (FDM) allows simplifying the data acquisition in vector control when the resolver is used as a position sensor. However, the crosstalk reduction in the demultiplexing process is still a difficult task. This article proposes an improvement of the FDM-based acquisition system through synchronous sampling and Differential Evolution (DE). The resolver signals and the PWM carrier are synchronized so that the resolver outputs are zero when the PWM carrier reaches its valleys. Thus, the fundamental component of the stator currents can be easily estimated from the signals sent to the acquisition system. These estimated current signals and an angle tracking observer (ATO) are used to estimate the angular position. DE and a discretized model of the ATO are applied in order to improve the angle estimation transient response and to reduce crosstalk. Conditions to apply the proposed multiplexing approach will be defined. Simulation and experimental results show that the proposed approach allows an accurate estimation of the current fundamental components and the angular position when FDM is used, with better performance respect to other approaches in the literature. This is the first time that a DE is used to tune an ATO.