VARIANCE OF SPECTRAL ENTROPY (VSE): AN SNR ESTIMATOR FOR SPEECH ENHANCEMENT IN HEARING AIDS
F Liu, Andreas Demosthenous, Ifat Yasin · 2024
In everyday situations an individual can encounter a variety of acoustic environments. For an individual with a hearing aid following speech in different types of background noise can often present a challenge. For this reason, estimating the signal-to-noise ratio (SNR) is a key factor to consider in hearing-aid design. The ability to adjust a noise reduction algorithm according to the SNR could provide the flexibility required to improve speech intelligibility in varying levels of background noise. However, most of the current high-accuracy SNR estimation methods are relatively complex and may inhibit the performance of hearing aids. This study investigates the advantages of incorporating a spectral entropy method to estimate SNR for speech enhancement in hearing aids; in particular a variance of spectral entropy (VSE) measure. The VSE approach avoids some of the complex computational steps of traditional statistical-model based SNR estimation methods by only measuring the spectral entropy among frequency channels of interest within the hearing aid. For this study, the SNR was estimated using the spectral entropy method in different types of noise. The variance of the spectral entropy in a hearing-aid model with 10 peripheral frequency channels was used to measure the SNR. By measuring the variance of the spectral entropy at input SNR levels between -10 dB to 20 dB, the relationship function between the SNR and the VSE was estimated. The VSE for the speech-in-noise was measured at temporal intervals of 1.5s. The VSE method demonstrates a more reliable performance in different types of background noise, in particular for low-number of speakers babble noise when compared to the US National Institute of Standards and Technology (NIST) or Waveform Amplitude Distribution Analysis (WADA) methods. The VSE method may also reduce additional computational steps (reducing system delays) making it more appropriate for implementation in hearing aids where system delays should be minimized as much as possible.