Dynamic Simulations supporting the Design Process of a real Combined Heat and Power Application in Switzerland
Adrian Rettig, Ulf Christian Müller, Lukas Gasser, Jonas Hurter · Energy Procedia · 2017
In many European countries the production of combined heat and power based on renewable energies is well established though the efficient and economical operation of such plants remains a challenging task. This also applies to the existing district heating network at Baden-Dättwil (Switzerland) where a conventional gas boiler is substituted by a wood-fired boiler comprising an Organic Rankine Cycle. An overall control strategy that allows fully exploring governmental incentives is therefore of paramount importance. In addition, the highly fluctuating heat demands combined with the thermal inertia of the different plant components impose demanding requirements to the control system to guarantee a stable as well as highly efficient operation. The overall control concept is successfully tested and verified by means of dynamic simulations of the overall plant with a simplified model for the district heating network. The models are implemented using the object oriented modeling language Modelica. The overall model is based on open source Modelica libraries such as ThermoCycle, Modelica Standard Library and StateGraph2 as well as on own Modelica models. The overall model is prepared to be coupled to the real plant control system which will allow virtual commissioning in the next step. This allows pre-tuning of control parameters as well as a weakness analysis which again helps to speed up the commissioning process. In General, the dynamic simulations proved to be a useful tool that deepened the insight and understanding of the plant operation at an early project phase and therefore greatly supported the making of design decisions. After commissioning, the calibrated simulation models will be used for monitoring purposes.