Dynamic instruction set extension of microprocessors with embedded FPGAs
Heiner Bauer · Qucosa (Saxon State and University Library Dresden) · 2017
Increasingly complex applications and recent shifts in technology scaling have created a large demand for microprocessors which can perform tasks more quickly and more energy efficient. Conventional microarchitectures exploit multiple levels of parallelism to increase instruction throughput and use application specific instruction sets or hardware accelerators to increase energy efficiency. Reconfigurable microprocessors adopt the same principle of providing application specific hardware, however, with the significant advantage of post-fabrication flexibility. Not only does this offer similar gains in performance but also the flexibility to configure each device individually. This thesis explored the benefit of a tight coupled and fine-grained reconfigurable microprocessor. In contrast to previous research, a detailed design space exploration of logical architectures for island-style field programmable gate arrays (FPGAs) has been performed in the context of a commercial 22nm process technology. Other research projects either reused general purpose architectures or spent little effort to design and characterize custom fabrics, which are critical to system performance and the practicality of frequently proposed high-level software techniques. Here, detailed circuit implementations and a custom area model were used to estimate the performance of over 200 different logical FPGA architectures with single-driver routing. Results of this exploration revealed similar tradeoffs and trends described by previous studies. The number of lookup table (LUT) inputs and the structure of the global routing network were shown to have a major impact on the area delay product. However, results suggested a much larger region of efficient architectures than before. Finally, an architecture with 5-LUTs and 8 logic elements per cluster was selected. Modifications to the microprocessor, whichwas based on an industry proven instruction set architecture, and its software toolchain provided access to this embedded reconfigurable fabric via custom instructions. The baseline microprocessor was characterized with estimates from signoff data for a 28nm hardware implementation. A modified academic FPGA tool flow was used to transform Verilog implementations of custom instructions into a post-routing netlist with timing annotations. Simulation-based verification of the system was performed with a cycle-accurate processor model and diverse application benchmarks, ranging from signal processing, over encryption to computation of elementary functions. For these benchmarks, a significant increase in performance with speedups from 3 to 15 relative to the baseline microprocessor was achieved with the extended instruction set. Except for one case, application speedup clearly outweighed the area overhead for the extended system, even though the modeled fabric architecturewas primitive and contained no explicit arithmetic enhancements. Insights into fundamental tradeoffs of island-style FPGA architectures, the developed exploration flow, and a concrete cost model are relevant for the development of more advanced architectures. Hence, this work is a successful proof of concept and has laid the basis for further investigations into architectural extensions and physical implementations. Potential for further optimizationwas identified on multiple levels and numerous directions for future research were described.