The influence of geometrical deviations of electrical machine systems on the signal quality of the variable reluctance resolver
Norbert Neidig, Quentin Werner, Markus Balluff, Hristian Naumoski, Martin Doppelbauer · 2016
Variable reluctance resolvers are needed to regulate electrical machines with inverter control. Due to several issues, e.g. discrete windings in the stator and geometric tolerances in the assembly of the electrical machine, the rotors angular position cannot be acquired properly. The subject of this paper is a variable reluctance resolver model to investigate manufacturing induced geometrical tolerances of the electrical machine in means of rotor position. For this purpose, a block diagram of a stator segment is built, connecting 24 segments to one stator core using PLECS. The rotor can be set freely in shape and position. By varying a permeance block the rotation, i.e. the position dependent airgap, is mirrored. The proposed model allows a sensitivity analysis of the sensor signal according to geometrical changes and the absolute position in the electrical machine system. To evaluate the investigations, the results are verified by measurements on a sensor test bench. The simulation results show a similar behavior as the measurement. Although the values differ by a factor of five, this absolute difference is discussed by means of neglected boundary conditions.