HIGH THROUGHPUT IMPLEMENTATION OF 64 BIT MODIFIED WALLANCE MAC USING MULTIOPERAND ADDERS
Badisa Sowmya Sri, S. V.Sudheer Kumar · IJITR International Journal of Innovative Technology and Research - IJITR International Journal of Innovative Technology and Research · 2016
Although redundant addition is widely used to design parallel multioperand adders for ASIC implementations, the use of redundant adders on Field Programmable Gate Arrays (FPGAs) has generally been avoided. The main reasons are the efficient implementation of carry propagate adders (CPAs) on these devices (due to their specialized carry-chain resources) as well as the area overhead of the redundant adders when they are implemented on FPGAs. This project presents different approaches to the efficient implementation of generic carry-save compressor trees. In computing, especially digital signal processing, the multiply–accumulate operation is a common step that computes the product of two numbers and adds that product to an accumulator. The hardware unit that performs the operation is known as a multiplier–accumulator (MAC, or MAC unit); the operation itself is also often called a MAC or a MAC operation. Power dissipation is one of the most important design objectives in integrated circuit, after speed. Digital signal processing (DSP) circuits whose main building block is a Multiplier-Accumulator (MAC) unit. High speed and low power MAC unit is desirable for any DSP processor. This is because speed and throughput rate are always the concerns of DSP system. MAC unit consists of adder, multiplier, and an accumulator it preserves a unique mapping between input and output vector of the particular circuit. In this MAC operation is performed in two parts Partial Product Generation (PPG) circuit and Multi-Operand Addition (MOA) circuit