Diagnosis and compensation of amplitude imbalance, imperfect quadrant and offset in resolver signals
Narges Noori, Davood Arab Khaburi · 2016
In this paper, a new method for detecting some errors in resolver signals is presented. Sin and cosine signals in resolver to digital converter's (RDC's) input might have errors, such as amplitude imbalance, imperfect quadrant or DC offset. Like other sensors some defects in mechanical structure and electrical or magnetic circuits cause to these errors in resolver output signals. The amplitude and phase of resolver output signals and consequently calculated angle are affected by these errors at any moment. Resolver output signals are more affected in their peak points than the other points. These peak points are easier and more accurate than the other points for analyzing, too. It is obvious that any error has unique effects on the signals. Therefore, by analyzing the effect on signals' peak points the error type and the value can be detected. To avoid wrong detection, error signal is defined, which detects the per unit signals deviation from the unit circle. Also, for error detection, there is no need to interrupt converter's operation. The proposed method is simulated in Matlab/Simulink environment, and the obtained results validate its effectiveness. Also, it is simulated on TMS320F2812 DSP using CCS 3.3, and the results are presented. Furthermore, by implementing the present RDC on motor controller DSP, it will be a low-cost approach.