Equipment selection and instrumentation
Tony Evans · Cambridge University Press eBooks · 2006
Equipment selection Introduction The selection of equipment for gynaecological ultrasound, as in other clinical areas, amounts to: selecting the scanner selecting the transducer selecting how best to use them Although the operator may have little or no choice about the scanner to be used, it is important to recognise that it is the combination of all three of the above which is critical. A proficient operator getting the best out of poor equipment is frequently more effective than a poor operator using potentially good equipment in an uninformed, unthinking or poorly thought-out manner. It follows that whoever is using the equipment needs a good understanding of the ultrasonic imaging process, its limitations and characteristics. In particular, there is a need to understand the many compromises that exist, how they come about and how the operator can control the choices being made in order to optimise the quality of the scan. The list below summarises the main considerations to be taken into account before the scan begins: spatial resolution temporal resolution penetration contrast resolution probe shape and size scanning ergonomics operating modes (e.g. pulsed and colour Doppler) contrast agents safety (acoustic, mechanical, electrical, biological, chemical) Note that the transducer frequency is omitted from the above list. This is partly because manufacturer's probe labelling may be inaccurate but, more importantly, because the probe frequency is not a good predictor of image quality and certainly does not describe it. The operator may well find that a low-frequency probe on one scanner gives a better image than a higher-frequency probe on another.