Green communications in cellular networks with fixed relay nodes
Peter Rost, Gerhard Paul Fettweis · Cambridge University Press eBooks · 2011
Introduction Mobile communication systems have to provide exponentially increasing data rates for an increasing number of subscribers using ubiquitous data services. As the capacity per cell is limited by the available bandwidth, the same time frequency resources must be spatially reused. Hence, the more the user density increases, the higher the spatial reuse must be to satisfy the demand for high data rate services. This chapter discusses relaying as a candidate technology to increase the spatial reuse and therefore to provide the required data rates while reducing energy consumption in mobile communication systems. Two motivating examples A challenging property as well as an opportunity for exploiting the wireless channel is nonlinear signal attenuation (path-loss), which offers the possibility to concentrate power at certain points in the network and spatially reuse resources within a mobile communication network. Consider an additive white Gaussian noise (AWGN) channel with a path-loss exponent α = 4, receiver noise power N , and transmission power P . Given these qualities and assuming a downlink transmission where a terminal can use the received signals from each radio access point (RAP), the observed signal-to-noise ratio (SNR) at a normalized distance d is given by ρ( d ) = Σ i P/N · | d i − d | −α , where d i is the position of the i th RAP.