Radix-8 Booth Encoded Modulo Multiplier
Rupesh Kumar Penugonda, Sana Polytechnic · 2012
To design an efficient integrated circuit in terms of area, power and speed, has become a challenging task in modern VLSI design field. The encryption and decryption of PKC algorithms are performed by repeated modulo multiplications these multiplications differ from those encountered in signal processing and general computing applications. The Residue Number System (RNS) has emerged as a promising alternative number representation for the design of faster and low power multipliers owing to its merit to distribute a long integer multiplication into several shorter and independent modulo multiplications. The multipliers are the essential elements of the digital signal processing such as filtering, convolution, transformations and Inner products. RNS has also been successfully employed to design fault tolerant digital circuits. The modulo multiplier is usually the noncritical data path among all modulo multipliers in such high-DR RNS multiplier. This timing slack can be exploited to reduce the system area and power consumption without compromising the system performance. With this precept, a family of radix-8 Booth encoded modulo multipliers, with delay adaptable to the RNS multiplier delay, is proposed. In this paper, the radix-8 Booth encoded modulo multipliers whose delay can be tuned to match the RNS delay. In the proposed multiplier, the hard multiple is implemented using small word-length ripple carry adders (RCAs) operating in parallel. The carry-out bits from the adders are not propagated but treated as partial product bits to be accumulated in the CSA tree. The delay of the modulo multiplier can be directly controlled by the word-length of the RCAs to equal the delay of the critical modulo multiplier of the RNS. By combining radix-8 Booth encoded modulo multiplier, CSA and prefix architecture of multiplier, for high speed and low-power is achieved.