Reconfiguration in octagonal mesh-based multicomputer systems with distributed checkpointing
N. Bauch, Erik Maehle · 2002
In the field of large multicomputer systems fault tolerance is no longer negligible. For the implementation of fault tolerance in mesh-based systems dynamic redundancy is a suitable approach. One major problem is the reconfiguration of the interconnection network after a fault. This paper presents two reconfiguration schemes for octagonal mesh-based multicomputer systems that are closely related to the distributed checkpointing approach. One scheme is able to reconfigure a 2D-mesh as an application graph in an octagonal 2D-mesh as a machine graph after a single fault, provided the checkpoints are organized as a meander. This reconfiguration can be done with a dilation of 2 and a congestion of 2. The other algorithm reconfigures any application graph in an octagonal mesh as machine graph that was originally embedded with the congestion of 1 under the assumption that the checkpoints are organized as a spiral and only single faults occur. In this case the dilation is increased by a factor of 2 for a square mesh and by a factor of 4 for a rectangular one, while the congestion is 3 in both cases. Also, some practical experiences with a sample implementation of the first reconfiguration scheme and a scheme for more general application graphs on the DAMP multicomputer system are reported.