On Designing Self-Tuning Controllers for AQM Routers Supporting TCP Flows Based on Pole Placement
Q. Chen, Ou Yang · IEEE Journal on Selected Areas in Communications · 2004
This paper revisits the simple pole placement technique in the classical control theory, and exploits this technique to propose two kinds of controllers for active queue management (AQM) in Internet protocol (IP) routers: the self-tuning proportional controller based on pole placement (ST/spl I.bar/P/spl I.bar/PP) and the self-tuning proportional-plus-integral controller based on pole placement (ST/spl I.bar/PI/spl I.bar/PP). The damping ratio /spl xi/ and undamped natural frequency /spl omega//sub n/ can be appropriately chosen such that: 1) the transient response performance of the system is satisfied and 2) all the poles would lie in the left-half s-plane to guarantee the stability of the control system. The self-tuning controllers can assign proper intervals of /spl xi/ and /spl omega//sub n/ to achieve good AQM performance and thereby adapting the system to significant load changes very well. Furthermore, the ST/spl I.bar/PI/spl I.bar/PP controller can regulate the packet drop probability based on the knowledge of the instantaneous queue size, and clamp the steady value of the queue length to a specified reference value. We verify the effectiveness of these two controllers via OPNET simulation. Our simulation results show the following: 1) choosing appropriate /spl xi/ and /spl omega//sub n/ can successfully satisfy the transient response of the system and 2) when the network load changes, the ST/spl I.bar/P/spl I.bar/PP controller and the ST/spl I.bar/PI/spl I.bar/PP controller exhibit extremely short settling time.