Volume Estimation of Potatoes Partly Covered with Dirt Tare
Jan Willem Hofstee, G.J. Molema · 2003, Las Vegas, NV July 27-30, 2003 · 2013
During on line yield mapping of potatoes with machine vision on a potato harvester not all potatoeswill be free from dirt tare. Proper yield estimation requires a good estimation of the size of these potatoes. Theobjective of the work described in this paper is the development of a method to assess the volume of thesepotatoes. The potatoes are approximated by ellipsis. This enables the reconstruction of the invisible part of thecontour. The center of the ellipsis (potato) is determined with three tangent lines at three points on the contourof the visible part. When the center is known, other parameters required to estimate the volume of the potato(width and projected area) can be determined. The average error in the estimation of the potato center is 2.6mm (8.4%). The average errors and standard deviations for the major axis and the minor axis are respectively6.1% (4.4%) and -4.3% (3.9%). The approximation of the projected area by an ellipsis shown an error of 5.1%(st.dev. 4.6% ) when the real data from the potato are used. This error increases to 6.4% (st.dev. 6.2%) whenthe estimated values for the major and minor axis are used. Finally the average error in the volume estimationis 1.0% (st.dev. 9.2%). The model with data of completely visible potatoes gave an estimation error of 0.27%.Approaching the potato by an ellipsis based on a visible part of the contour gives an increase of the error butthe increase is relatively small. This means that there are good perspectives to estimate also the volume ofpotatoes partly covered with dirt tare.