Image compression and transmission based on LAN
Sujuan Huang, Yufeng Li, Zhijiang Zhang · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2004
In this work an embedded system is designed which implements MPEG-2 LAN transmission of CVBS or S-video signal. The hardware consists of three parts. The first is digitization of analog inputs CVBS or S-video (Y/C) from TV or VTR sources. The second is MPEG-2 compression coding primarily performed by a MPEG-2 1chip audio/video encoder. Its output is MPEG-2 system PS/TS. The third part includes data stream packing, accessing LAN and system control based on an ARM microcontroller. It packs the encoded stream into Ethernet data frames and accesses LAN, and accepts Ethernet data packets bearing control information from the network and decodes corresponding commands to control digitization, coding, and other operations. In order to increase the network transmission rate to conform to the MEPG-2 data stream, an efficient TCP/IP network protocol stack is constructed directly from network hardware provided by the embedded system, instead of using an ordinary operating system for embedded systems. In the design of the network protocol stack to obtain a high LAN transmission rate on a low-end ARM, a special transmission channel is opened for the MPEG-2 stream. The designed system has been tested on an experimental LAN. The experiment shows a maximum LAN transmission rate up to 12.7 Mbps with good sound and image quality, and satisfactory system reliability.