On measurement of impact of the metallization and FPGA design to the changes of slice parameters and generation of delay faults
Petr Pfeifer, Zdeněk Plíva · 2012
The rapidly growing world of FPGA devices offers important as well as interesting platforms for analyses of process scaling. It creates also new study opportunities in case of new process variations and degradation effects. Changes in parameters of FPGAs in time or under either power supply voltage or temperature variations result in timing variations or delays and may affect the final design quality and dependability. Such timing variations may result in delay faults, up to the final device or equipment malfunction or failure. FPGA designs must be carefully tested and simulated during the design phase. This area is well-covered by many papers and publications and being investigated again with the new processes coming every approximately 2 years. This paper investigates the area of effects caused by the FPGA chip design and metallization or design trade-offs. The paper presents interesting results obtained during various tests including the important values of the total delays caused by neighboring loaded SLICEs or locations in the FPGA. These results were obtained by a method of frequency and delay measurement, capable of delivering stable results in the range of 0.1ps (100fs), using only inexpensive tools and methods.