A CMOS RF RMS Detector for Built-in Testing of Wireless Transceivers
Alberto Valdes‐Garcia, R. Venkatasubramanian, Raghavan Srinivasan, José Silva-Martínez, E. Sánchez‐Sinencio · 2005
A CMOS RF RMS detector is introduced. It generates a DC proportional to the RMS voltage amplitude of an RF signal. Its high input impedance and small silicon area make it suitable for the built-in testing (BIT) of critical RF blocks of a transceiver such as a low noise amplifier (LNA) and power amplifier (PA) without affecting their performance and with minimum area overhead. The use of this structure in the fault detection and diagnosis of a wireless transceiver is described and illustrated with an example. The transistor-level implementation of the proposed circuit is discussed in detail. Post-layout simulation results using CMOS 0.35/spl mu/m technology show that this testing device is able to perform an RF to DC conversion at 2.4GHz in a dynamic range of 20dB using an area of only 0.0135mm/sup 2/ and presenting an equivalent input capacitance of 22.5fF.